PANASONIC AW-HE130

項目 規格
GENERAL
Power requirements DC 12 V (AC adaptor supplied) DC 42 - 57 V (PoE+ power supply)
Current consumption 1.8 A (AC adaptor supplied) 0.6 A (PoE+ power supply)
Ambient operating temperature 0 °C to 40 °C (32 °F to 104 °F)
Storage temperature –20 °C to 50 °C (–4 °F to 122 °F)
Allowable humidity ranges 20 % to 90 % (no condensation)
Mass Approx. 3.1 kg (6.83 lb) [Including mount bracket]
Dimensions (W x H x D) 180 mm × 228 mm × 234 mm (7-3/32 inches x 9 inches x 9-3/16 inches)
(excluding protrusions, cable cover, direct ceiling mount bracket)
Finish AW-HE130WP/AW-HE130WE: Pearl white
AW-HE130KP/AW-HE130KE: Metallic black
Controller supported*1 AW-RP120, AW-RP50, AK-HRP200
INPUT
Input connector DC 12 V IN, G/L IN (BNC)
• BBS (Black Burst Sync), tri-level sync supported
• Locking to a color subcarrier is not possible with BBS.
PoE+ (IEEE802.3at standard)
OUTPUT
Video
output		 HDMI HDMI connector
• HDCP is not supported.
• Viera Link is not supported.
HD/SD SDI OUT SMPTE424/SMPTE292/SMPTE259 standards 75  (BNC×1)
VIDEO OUT NTSC/PAL 1.0 V [p-p]/75  (BNC×1)
INPUT/ OUTPUT
Input/
Output
connector		 LAN LAN connector for IP control (RJ-45)
RS-422 CONTROL IN RS-422A (RJ-45)
MIC/LINE input 3.5 mm stereo mini jack
Input impedance: High impedance
• During MIC input
Supported mic: Stereo mic (plug-in power ,on/off switching via menu)
• Supply voltage: 2.5 V ± 0.5 V
Mic input sensitivity: Approx. -40 dBV ± 3 dBV (0 dB=1 V/Pa, 1 kHz)
• During LINE input
Input level: Approx. -10 dBV ±3 dBV
FUNCTIONS AND PERFORMANCE
[Camera unit]
Imaging sensors 1/2.86-type Full-HD 3MOS
Lens Motorized 20 zoom, F1.6 to F3.4
(f=4.5 mm to 90 mm; 35 mm equivalent: 32.13 mm to 642.5 mm)
Focus Switching between auto and manual
Focus distance Entire zooming range: 800 mm (2.62 ft) Wide end: 400 mm (1.31 ft)
Color separation optical system 3MOS
Minimum illumination 2 lx (50 %, F1.6, 36 dB)
Horizontal resolution 1000 TV lines Typ (Center area)
FUNCTIONS AND PERFORMANCE
Gain selection Auto, 0 dB to 36 dB
Frame mix*2 0 dB, 6 dB, 12 dB, 18 dB, 24 dB
Electronic shutter speed 59.94p/59.94i: 1/100, 1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000
29.97p: 1/30, 1/60, 1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000
23.98p: 1/24, 1/60, 1/120, 1/250, 1/500,
1/1000, 1/2000, 1/4000, 1/10000
50p/50i: 1/60, 1/120, 1/250, 1/500,1/1000,
1/2000, 1/4000, 1/10000
25p: 1/25, 1/60, 1/120, 1/250, 1/500,
1/1000, 1/2000,1/4000,1/10000
Synchro scan 59.94 Hz:60.15 Hz to 642.21 Hz
50 Hz:50.15 Hz to 535.71 Hz
Gamma HD, SD, FILMLIKE1, FILMLIKE2, FILMLIKE3
0.30 to 0.75 (Manual setting)
White balance AWB A, AWB B, ATW, 3200K, 5600K, VAR (2000K to 15000K)
Chroma amount variability OFF, -99 % to 40 %
Scene file Scene1, Scene2, Scene3, Scene4
Output format 1080/59.94p,1080/29.97p*3,1080/23.98p,
1080/59.94i,1080/29.97PsF,1080/23.98PsF,
720/59.94p,480/59.94p(i)*4,1080/50p,1080/25p*3,
1080/50i,80/25PsF,720/50p,576/50p(i)*4
Synchronization system Internal/External synchronization (BBS/Tri-level sync)
[Pan-tilt head unit]
Installation method Stand-alone (Desktop) or suspended (Hanging)*5
Camera/pan-tilt
head control		 IP connecting cable
• When connecting through a hub:
LAN cable*6 (category 5e or above, straight cable), max. 100 m (328 ft)
• When a hub is not used
LAN cable*6 (category 5 or above, crossover cable) max.100 m (328 ft)
RP connecting Cable
LAN cable*6 (category 5 or above, straight cable), max. 1000 m (3280 ft)
RS-422A, AW series protocol
Pan-tilt operation speed 0.08°/s to 60°/s
Panning range ±175°
Tilting range*7 –30° to 210°
Quietness NC35 or less
※備註 本表僅供參考，若有任何差異將以實機功能為準。
*1: It may be necessary to upgrade the version of the controller in order to support the unit. For details on upgrading, visit the support page on the following website. http://pro-av.panasonic.net/
*2: This cannot be configured when the format is
1080/29.97p, 1080/23.98p, 1080/29.97PsF 1080/23.98PsF, 1080/25p, or 1080/25PsF.
*3: Native output
*4: A ‘P’ signal is output as HDMI output, an ‘I’ signal is output as SDI and an analog output for output formats of 480/59.94p(i) and
576/50p(i).
*5: To ensure safety, the unit must be secured using the mount bracket supplied.
*6: Use of an STP (shielded twisted pair) cable is recommended
*7: Depending on the pan or tilt position, the camera may be reflected in the image.