PANASONIC AW-HE50HN/SN
項目 規格
General
Power Requirements DC 12V ± 10% (AC adaptor supplied)
Power Consumption 1.2A(AW-HE50H), 1.3A(AW-HE50S)
Operating Temperature 0℃ to 40℃
Allowable Humidity Range 20% to 90% (no codensation)
Storage Temperature -20℃ to 50℃
weight Approx 1.4kg
Demensions(W x H x D) 160mm x 178mm x 166mm(excluding protrusions,cable cover, direct celling mount bracket)
Camera
Image Sensors 1/3 type Full-HD MOS
Lens Motorized 18x zoom,F1.6 to F2.8(F4.7 mm to 84.6mm;35mm equivalent:
36.9 mm to 664.5 mm)
Focus Switching between auto and manual
Focus distance Entire zooming range:1.5 m,Wide end : 30cm
Color Separation Optical System On-chip color filter system
Minimun Illumination 3 lx (50 IRE, F1.6, +36db)
Horizontal Resolution 850 TV lines TYP (Center area)
Gain Selection Auto, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB,18 dB
Frame Mix 0 dB, 6 dB, 12 dB, 18 dB
Electronic Shutter Speed 1/100, 1/250, 1/1000, 1/2000, 1/4000, 1/10000
Synchro Scan 60.24Hz to 646.21 Hz
Gamma off, Normal (Low, Mid. High), Cinema
White Balance AWB A , AWB B, ATW
Scene File FullAuto, Manual1,Manual2,Manual3
Output Format HD 1080/59.94i, /720/59.94p
SD 480/59.94i
Synchronization System AW-HE50H (Internal synchronization)
AW-HE50S (Internal/Ezternal synchronization (BBS))
Input Connector DC 12V IN,EXT SYNC IN (BNC)(AW-HE50S only)
*BBS (Black Burst Sync) signal supported
Output Connector
HDMI HDMIx1(AW-HE50H)
SDI BNCx1 Compliant with the SMPTE292M/SMPTE259M standards /75Ω(AW-HE50S)
Composite MULTI-I/Fx1 1.0 V[p-p ] / 75Ω
Y/PB/PR(HD/SD) MULTI-I/F x 1 Y:1.0 V[p-p] / 75Ω, PB/PR:0.7V/ 75Ω*For Y/PB/PR ,the 1080,720 or SD format is selected depending on the format setting.
Input/Output Connector
LAN LAN connector for IP control (RJ-45)
RS-422 MULTI-I/Fx1 CONTROL IN RS-422*1
Pan-Tilt Mechanism
Pan/Tilt Operation Speed MAX 90°/s
Panning Range ± 175°
Tilting Range*2 90° to -30°
Quietness NC35(at normal speed), NC40(at fast speed when preset)
Standard Accessories Mount bracket for installation surface (Hanging*3/Desktop),
Drop-prevention wire(already attached to the unit),
Bracket mounting screws(bind-head)M4 x 10 mm,
Main unit mounting screw(with flat washer,spring washer)M3 x 6mm,
Cable cover,Power cable,(2m [6.6ft]),AC adaptor
※備註 本表僅供參考,若有任何差異將以實機功能為準。
*1 Multi-interface Cable (AW-CA20T6G) is required
*2 The camera may be subject to external glare, depending on the pan and tilt position,
*3 To ensure more safety, AW-HE50HN/HE/SN/SE can be secured by using the direct celling mount
bracked (WV-Q105).