產品型號 : PANASONIC AW-HE60SN/HN
General
項目 規格
Power Requirements DC 12 V (AC adaptor supplied)
Power Consumption 1.3 A (AW-HE60H), 1.4 A (AW-HE60S)
Operating Temperature 0°C to 40°C (32°F to 104°F)
Allowable Humidity Range 20 % to 90 % (no condensation)
Storage Temperature -20°C to 50°C (-4°F to 122°F)
Weight Approx.1.4 kg (Approx.3.1 lbs)
Dimensions (W × H × D) 160 mm × 178 mm × 166 mm
(6-5/16 inches × 7 inches × 6-9/16 inches)
(excluding protrusions, cable cover, direct ceiling mount bracket)
Camera
Image Sensors 1/3 type Full-HD MOS
Lens Motorized 18x zoom, F1.6 to F2.8
(f=4.7 mm to 84.6 mm; 35 mm equivalent: 36.9 mm to 664.5 mm)
Focus Switching between auto and manual
Focus distance Entire zooming range: 1.0 m (3.3 ft.), Wide end: 30 cm (0.98 ft.)
Color Separation Optical System On-chip color filter system
Minimum Illumination 3 lx (50 IRE, F1.6, 36 dB)
Horizontal Resolution 850 TV lines Typ (Center area)
Gain Selection Auto, 0 dB, 3 dB, 6 dB, 9 dB, 12 dB, 15 dB, 18 dB
Frame Mix 0 dB, 6 dB, 12 dB, 18 dB
Electronic
Shutter Speed
(59.94 Hz) 1/100, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
(50 Hz) 1/120, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10000
Synchro Scan (59.94 Hz) 60.24 Hz to 646.21 Hz
(50 Hz) 50.20 Hz to 538.51 Hz
Gamma Off, Normal (Low, Mid, High), Cinema
White Balance AWB A, AWB B, ATW
Scene File FullAuto, Manual1, Manual2, Manual3
Output
Format
(HD) 1080/59.94p*1, 1080/59.94i, 1080/50p*1,
1080/50i, 1080/29.97PsF, 1080/25PsF, 720/59.94p, 720/50p
(SD) 576/50p*1, 576/50i, 480/59.94p*1, 480/59.94i
Synchronization
SystemScene
Internal synchronization (AW-HE60H),
Internal/External synchronization (BBS) (AW-HE60S)
Input Connector DC 12 V IN, EXT SYNC IN (BNC) (AW-HE60S only)
*BBS (Black Burst Sync) signal supported
Output Connector
HDMI HDMI×1 (AW-HE60H)
SDI BNC×1 Compliant with the SMPTE292M/SMPTE259M standards /
75 Ω (AW-HE60S)
Composite MULTI-I/F×1 1.0 V [p-p] / 75 Ω
Y/PB/PR
(HD/SD)*2
(HD) MULTI-I/F×1 Y: 1.0 V[p-p] / 75 Ω, PB/PR: 0.7 V[p-p] / 75 Ω
(SD)
(59.94 Hz) MULTI-I/F×1 Y: 1.0 V[p-p] / 75 Ω, PB/PR: 0.7 V[p-p] / 75 Ω
(50 Hz) Y: 1.0 V[p-p] / 75 Ω, PB/PR: 0.525 V[p-p] / 75 Ω
Input/Output
Connector
(LAN) LAN connector for IP control (10BASE-T/100BASE-T, RJ-45)
(RS-422) MULTI-I/F×1 CONTROL IN RS422A*3
Mechanism Pan-Tilt
Pan/Tilt Operation Speed MAX 90°/s
Panning Range ±175°
Tilting Range*4 90° to -30°
Quietness NC35 (at normal speed), NC40 (at fastest speed when preset)
Standard Accessories Mount bracket for installation surface (Hanging*5/Desktop),
Drop-prevention wire (already attached to the unit),
Bracket mounting screws(bind-head) M4 × 10 mm,
Main unit mounting screw (with flat washer, spring washer)
M3 × 6 mm, Cable cover, Power cable (2 m[6.6 ft]), AC adaptor

*1 When 1080/59.94p or 1080/50p mode is selected, a progressive signal is output through HDMI OUT, and an interlace signal is output through analog component OUT and SDI OUT.

When 480/59.94p or 576/50p mode is selected, a progressive signal is output through HDMI OUT (AW-HE60HN/HE only) and analog component OUT, and an interlace signal is output through
SDI OUT (AW-HE60SN/SE only).

When IP images distributed, component signals (480/59.94i, 576/50i) are not output through a multi-interface.

*2 Y/PB/RP changes to 1080/720/SD depending on format setting.

*3 Multi-interface Cable (AW-CA20T6G) is required.

*4 The camera may be subject to external glare, depending on the pan and tilt position.

*5 To ensure more safety, AW-HE60SN/SE/HN/HE can be secured by using the direct ceiling mount bracket (WV-Q105).

※備註 本表僅供參考,若有任何差異將以實機功能為準。